Rotary Table 3"/ 80 MM With ER16 & ER20 Collet Adaptor, M6 Clamp Kit, Round Vice, Tailstock & A Chuck With Back Plate & Fixing Tnuts (With 70 MM Independent Chuck)

Set of 3" /80 mm rotary table along with a round vice, er-16 & er 20 collet adapter, fixing t nuts & suitable tailstock height - 38 mm ( only the rotary table) Worm- gear ratio - 36:1, which basically means that the 1 rotation of the handle shall rotate the table by 10 degrees. Table scale is calibrated in 5 degree increment. Can be used both in horizontal & vertical position. Supplied with a er 16 collet adapter that can be mounted directly on the rotary table. The base plate has a spigot extension to guide into the center of the table in order to achieve higher accuracies. Base plate is drilled in a manner that it can fit both 3 as well as 4 slot rotary table.

• Set Of 3" /80 MM Rotary Table Along With A Round Vice, ER-16 & ER20 Collet Adapter,tailstock & Small Chuck With Back Plate & Fixing Tnuts
• Total Height Of The Assembly (Table & Er Collet Adaptor) Is Approx 80 Mm. *see Photo
• Worm- Gear Ratio - 36:1, Which Basically Means That The 1 Rotation Of The Handle Shall Rotate The Table By 10 Degrees.
• The Base Plate Of Adaptor Is M6 Drilled In A Manner That It Can Fit Both 3 As Well 4 Slots Table.